LAMP SET with SafeLine Reflector Medium
Easy to assemble! With plug and play system! (C14)
Sodium vapour lamp set consisting of:
- 1*Ballast analogue or digital (dimmable)
- 1*Super HPS sodium lamp 400 Watt or 600 Watt
- 1*SafeLine reflector medium (68cm x 55cm) (illumination area: 150cm x 120cm) (incl. c-14 cable for connecting the lamp)
+65% higher surface illumination*
-30% less energy use*
-25% less heat development*
*= compared to conventional reflectors
Note: The main difference between analogue and digital ballasts is that digital ballasts can be dimmed. For these, the highest wattage sodium lamp is still selected. For example, a 600Watt digital ballast will need a 600Watt Super HPS or 600Watt metal halide (MH) lamp, even if the lamps can be dimmed to lower wattages. Digital ballasts are therefore particularly suitable in summer, as the heat generated by the lamp can be controlled by adjusting the wattage level. In addition, digital ballasts are often used during the growth phase to illuminate the plants at a low wattage, as this saves electricity and the plants do not need the full lamp power during the growth phase.
Set -400Watt and analogue ballast-:
Super HPS 400W (high red light) sodium vapour lamp for the flowering phase (for the growth phase there is the option of purchasing a metal halide lamp with a high blue light component in the 'Additional accessories' section).
Analogue ballast 400Watt from Urban Garden *Plug-and-Play*.
Set -400Watt and digital ballast-:
Super HPS 400W (high red light content) sodium vapour lamp for the flowering phase (for the growth phase, there is the option of purchasing a metal halide lamp with a high blue light content in the 'Additional accessories' section).
digital / dimmable ballast 400W of the SafeLine series; dimmable in the steps: 150Watt, 250Watt, 400Watt and including Super-Lumen dimming step with approx. 450Watt *Plug-and-Play*.
Set -600Watt and analogue ballast-:
Super HPS 600W (high red light) sodium vapour lamp for the flowering phase (For the growth phase, there is the option of purchasing a metal halide lamp with a high blue light content in the 'Additional accessories' section).
Analogue ballast 600Watt from Urban Garden *Plug-and-Play*.
Set -600Watt and digital ballast-:
Super HPS 600W (high red light content) sodium vapour lamp for the flowering phase (for the growth phase, there is the option of purchasing a metal halide lamp with a high blue light content in the 'Additional accessories' section).
digital / dimmable ballast 400W from Urban Garden; dimmable in the steps: 250Watt, 400Watt, 600Watt and including X-BOOST dimming step with approx. 650Watt *Plug-and-Play*.
Do I need a metal halide lamp with my set? Metal halide lamps, just like sodium vapour lamps, are high-pressure lamps. In contrast to sodium vapour lamps, they have an increased blue light component, which makes them particularly suitable for use in growth. The internode distances of the plant are shortened by the light of the metal halide lamp, so that the plant grows bushier and shoots up less. A metal halide lamp should be used in growth especially for longer growth phases (e.g. growing from seed) or when using various growth optimisation methods (such as ScroG or Sea of Green). The number of watts should correspond to the selected VSG; if a digital/dimmable VSG is selected, the strength of the selected MH should correspond to the maximum strength of the ballast.
Pictures: (Appearance of the ballast may vary).
