SMS COM MK2E Smart Controller (without probe)

Description:

SMSCOM Smart controller is a compact ventilation controller in a plug housing. Its maximum current is 6.5 amps. The SMSCOM Smart Controller is electronically controlled and provides a simple and accurate method of achieving and maintaining your desired temperature.

The SMSCOM Smart Controller provides a constant room temperature and continuous regulation of airflow. After you have set the desired temperature level, the Smart Controller automatically ensures an ideal room climate.

• Controls fans
• Motion Flow
• Continuous regulation
• Automatic with thermostat
• Plug-and-play
• Max. Power 6.5 A
• 5 year warranty

How the Smart controller works:
The smart controller works with our motion flow software. Therefore the Smart controller reacts
completely different than other types of controllers. When you first install the Smart Controller,
the system will take 5 to 10 minutes to scan the room to determine the correct fan speed.
fan speed is possible.

After that, the controller knows exactly what speed the fan needs to turn to maintain the desired temperature. From that point on, the Smart Controller automatically makes adjustments to the fan speed to ensure continuous maintenance of the set temperature.

• More than 60 different speed settings
• Smooth control of fan speed
• Unrivaled precise temperature control
• New technology reduced fan noise 
• Longer fan life
• Smart Controller is immediately ready for operation
• No wiring required

Just plug in your fan and set the desired temperature and minimum fan speed: Everything else is handled by the Smart Controller.

How to use the device:

• Connect the temperature sensor to the Smart *.
• Connect the Smart controller to a power outlet.
• Install the temperature sensor in the center of the room.
• Connect your fan to the Smart controller.
• Set the desired minimum fan speed**.
• Set the desired temperature.

* Without temperature sensor, the smart controller works as a manual fan control.

** Minimum fan speed: This is the lowest speed at which your fan will operate. The lower the speed, the wider the operating range in which the fan must operate. We recommend that you select the lowest setting. This means that the fan will operate in a range between slow idle and maximum speed to provide a constant room temperature. If necessary, adjustments can be made to the lowest speed to match your fan type.

Now the smart controller is scanning your room. PLEASE BE PATIENT! This process may take 5 to 10 minutes.

During the scanning process, the Smart Controller will operate at 100% for a few seconds and then at the lowest fan speed setting. After 5 to 10 minutes, the controller will operate at the correct speed and no further manual adjustments are required. The Smart Controller will automatically make adjustments as needed to maintain the temperature.

Click here for the associated temperature probe.