BLUELAB PH replacement electrode for PH/EC combo meters

Description:

The pH probe from Bluelab is suitable as a replacement for the Bluelab Combo Meter as well as the Bluelab Guardian. The round pH probe is completely waterproof and less fragile than all-glass electrodes. You immerse yourself completely in the nutrient solution to obtain measured values.

By regular cleaning, the life of the measuring instruments can be extended. Each pH electrode forms a thin film in watery solutions on the sensor, which increases after prolonged use.

Always keep the pH probe moist in order to avoid permanent damage and increase the lifespan. Put the protective cap on again after each use. Never store electrodes in distilled water and recalibrate the device after cleaning. Normally, the shelf life is at least 8 to 10 months, although it can usually be increased to more than 2 years with good autoe.

Technical data:

• Material: Plastic
• Temp. range: 0-60°C
• Waterproof: Yes (up to 2m)
• Electrode length: 163mm
• Diameter: 12mm
• Cable length: 2m
• pH measurement range: 0-14pH
• Reference: Double Junction, Ag/AgCl, Sat. KCl Gel
• Tilt: > 97 Prozent at 25°C
• Accuracy: ±0.01 pH in buffers
• Control deviation: ±0.5 pH