Description:
The high-quality ventilation set is ideal for a grow tent with a base area of 120cm x 240cm to 200cm x 200cm.
EC controller:
There are two options for the EC controller
1.) Can-Fan LCD EC Controller
This high-quality EC fan control, which has been programmed for EC motor fans such as Q-Max EC and Max Fan Pro series EC, can easily control the environment. The supplied sensor measures temperature, humidity, day/night mode. Low pressure is also possible when using an intake fan; 15 programs are available with only 3 buttons.
The new Can Fan EC LCD controller has a wide range of functionalities:
- Temperature and humidity control
- Day and night settings
- Low pressure settings
- Settings for maximum and minimum speed
- Hysteresis Settings
- Control of up to 10 EC fans with a single controller
- Plug & Play jack connector
- Noiseless control
The new Can Fan EC LCD control is easy to use with the Up / Down buttons. The 12 VDC power supply is included, as well as all necessary cables (4 meters), plug and sensor for day and night/temperature/humidity. Manual in 17 languages.
The Can Fan EC LCD controller is one of the most complete EC controllers available on the market.
2.) CAN FAN EC Speed Control
Speed controller for Can Fan EC fans.
The Can-Fan EC Speed Controller, the easy-to-connect speed controller for silent control of our EC fans. The plug & amp; play controller is very easy to use with just one handle Included in delivery are a 4m long connection cable with an easy-to-connect 3.5 mm 4-pin jack connector for connecting to our EC fans.
- Plug and Play - easy to use
- Speed control
- No additional power supply required
- Easy connection with jack plug
- 4 m jack connection cable
The basic set includes:
1.) Can-Fan Max Fan Pro EC 200mm/1301m3 (incl. cables)
It is ideal for rooms where a high efficiency of the fan and quiet operation are required. Adapted to continuous operation. It is characterized by very high reliability. The fan has a 2-step adjustment via the built-in remote control. The motor of the projector is manufactured in Switzerland. The propeller is designed in such a way that it generates a strong air flow and at the same time reduces the noise level.
2.) Can-Lite activated autobon filter 1500m3/200mm (S-Steel)
The Can-Lite was developed after years of testing and research and is characterized by simple installation, durability and effectiveness. The Can-Lite is manufactured according to a similar procedure as the Can original filters, but uses a highly perforated, lightweight aluminium housing and a special variety of fresh CKV-4 coal instead. This makes the filters lighter and can handle larger airflows without any odour breakthroughs.
Characteristics:
- Low weight
- Can handle relatively high (ventilator) flow rates
- Flanges are pre-mounted on the filter
- Packed in your own autoton
- Prefilter included
In addition, for the use of the ventilation kit, a connecting hose (usually 2m is sufficient) as well as mechanical clamps (minimum 2 pieces) are required for mounting. Select these and other additional components in the right column in desired length, number and size. In the connection hose, you can choose between different variants (Alu-Flex, Iso-Flex and Combi-Flex)
Note: If an additional silencer is selected to minimize the noise of the fan, a connecting element for the ventilation parts must also be purchased. The silencer and fan can be connected either by a cuff or with a tank tape. We always recommend the cuff as a more stable variant.
Information on silencers:The Can-Fan muffler has a length of 50cm and the SafeLine muffler has a length of 60cm.
